Hey WytWun... would there be any chance of you looking at a leggy rom and seeing if you could add a transmission definition to it? would be great to be able to adjust some trans values![]()
Mawson White KL Verada AWD "Magna Evolution"
Black FL Galant VR4
Ironbark 30th Anniversary Outlander
State Rep VIC
AMC//////ALL WHEEL DRIVE DIVISION
Do you know what sort of ECU (H8 or SH2) is in the car? I've been under the impression that the Legnum ECUs were all H8, even in post 2000 cars. H8 auto ECUs actually have 2 separate ROMs: the first is for the engine and the second for the trans. Each ROM is 128kB in size. The standard reflashing cable only works with the engine ROM; getting at the trans ROM requires a wiring mod to the reflash connector wiring to swap the reflash signal between the two wired pins when desired. There is a reasonable chance of finding the speed based shift maps in an H8 trans ROM if you can read it.
If the ECU is an SH2, the auto ROM will be 512kB and that I can easily deal with. You may need the custom read template mentioned in the first post to read the whole ROM in that case.
Last edited by WytWun; 20-04-2016 at 07:47 PM. Reason: typo fix
The wiring mod to the reflash connector wiring mentioned in the previous post may also permit access to the trans ROM in H and late F series Magna/Verada ECUs, provided that there are two wires running to the reflash connector.
Auto cars with SH2 ECUs only have one wired pin in the reflash connector as the trans code is in the same ROM as the engine code.
Already have some auto stuff defined, can define more if required.
https://www.ozvr4.com/threads/officia...-thread.11840/
Last edited by BCX7; 02-05-2016 at 12:11 PM.
RIP - Fully Jet Black '85 Magna
2000 Galant VR-4 Type V
Anyone have a manual ralliart tune adjusted for 98 Ron available?
Updated set of definitions available via first post.
There are currently 1 users browsing this thread. (0 members and 1 guests)